Shinko ACD-15A-R/M Скачать руководство пользователя страница 18

Страница: 18 / 112

6. Operation Flowchart

Simplified setting and group selection are explained separately.

All setting items are used for the purpose of explanation, however some items will not be

indicated depending on the specification.

6.1 Simplified Setting (SV, Event and PID setting modes: Effective for Fixed value control)

Power ON

(*1)

PV/SV Display Mode

Standby mode

Manual control

(*3)

setting mode

(*4)

Event

setting mode

(*4)

PID

setting mode

(*5)

MV/

Remaining step time

indication mode

SV1

EVT1
alarm value

Proportional
band

MV indication

EVT1 high limit
alarm value

Integral
time

Remaining step
time indication
(program control)

EVT4
alarm value

Derivative
time

EVT4 high limit
alarm value

ARW

EVT5
alarm value

Manual
reset

EVT5 high limit
alarm value

MV
rate-of-change

[Key operation]

•

: This means that if the key is pressed, the unit proceeds to the next setting mode.

•

: Press the

key and

key (in that order) together.

•

: Press the

key and

key (in that order) together.

• (3 sec)

: Press the key for 3 seconds.

[Setting item]

• The PV Display indicates setting characters, and the SV/MV/TIME Display indicates the factory default.

• Setting items with dotted lines are optional, and they appear only when the options are added.

(3 sec)

(*2)

(3 sec)

(*1)

The unit starts from

the power-off status.

(*2)

For fixed value

control, if this key is

pressed for 1 sec, the

PV/SV Display Mode

and standby mode

can be switched.

(*3)

If power is turned

OFF during manual

control, the unit starts

from PV/SV Display

Mode.

(*4)

If ‘Set value memory’

is selected in [Event

input allocation], only

the setting items of the

Set value memory

number (selected by

terminal connection) can

be set. To select other

memory numbers,

connect relevant

terminals again.

(*5)

If PID zone function

“Used” is selected, the

settable PID zone

parameters depend on

the SV.

Содержание ACD-15A-R/M

















































































































Результаты поиска

Содержание ACD-15A-R/M

Отзывы:

Shinko ACD-15A-R/M, Инструкция по эксплуатации, Страница: 18 / 112

Результаты поиска

Содержание ACD-15A-R/M

Отзывы: