Shinko Denshi LF124R, Руководство по эксплуатации

Страница: 80 / 154

5 Function Setting LF(R) Series Operation Manual
- 70 -
5-2 Readability Setting
Use this function to set the readability. The larger the readability becomes, the less the
balance is affected by external influences. In addition, it takes less time for the balance
reading to stabilize.
Each unit has a different readability.
The readability setting is available for the single-range type only.
1
Go to the function setting mode.
(Refer to Section 2-6 “Basics of Function
Settings.”)
Press and hold the [Function] key until “Func” is
displayed.
2
Select the readability. Press the [Function] key several times to select “b2.d.A.”
Press the [Zero/Tare] key to select from 1
through 5.
3
Save the setting. Press the [Set] key.
The balance returns to the weight display.
To set the readability of unit b, select “b4.d.b” in step 2.
You can also set the same unit for unit A and unit b, and set different minimum indications,
so that unit A and unit b can be used to switch the readability.
List of readability settings
Set value LF(R)-124 / -224
LF-135R
Unit mg g ct mom mg g ct mom
1 0.1 0.0001 0.001 0.0001 0.01 0.00001 0.0001 0.00001
2 0.2 0.0002 0.002 0.0002 0.2 0.00002 0.0002 0.00002
3 0.5 0.0005 0.005 0.0005 0.05 0.00005 0.0005 0.00005
4 1 0.001 0.01 0.001 0.1 0.0001 0.001 0.0001
5 2 0.002 0.02 0.002 0.2 0.0002 0.002 0.0002