Shinko Denshi LF124R, Руководство по эксплуатации

Страница: 67 / 154

LF(R) Series Operation Manual 4 Adjusting the Scale
- 57 -
4
Return to the weight display. Press the [Set] key.
The balance returns to the weight display.
4-1-3 Span adjustment with external weight
1
Go to the function setting mode.
(Refer to Section 2-6 “Basics of Function
Settings.”)
Press and hold the [Function] key until “Func” is
displayed.
2
Select the span adjustment with external weight. Press the [Function] key several times to select “8.CA.”
Press the [Zero/Tare] key to select “8.CA. 3.”
Press the [Set] key to return to the weight display.
3
Start span adjustment with external weight. Press the [Cal] key.
“CAL EHt” is displayed.
When “PuSH C” is displayed, press the [Cal] key.
The display changes from “CAL EHt” to “on 0” and
then zero-point adjustment starts.
(If an instrumental error of weight is used, the
entered instrumental error of weight is displayed
for about two seconds.)
4
Place a weight on the weighing pan. When zero-point adjustment is completed and “on F.S.” is
displayed, place a weight on the weighing pan.
Adjustment will start.
The display changes to “buSY” and then “End.”
When the span adjustment is completed, the
balance returns to measurement mode.