17(33)
storage tank to the vacuum hopper.
Auto loader
SAL-810G
IMM
SMH
Air suction
pipe
Hopper
dryer
Material
suction
pipe
Material
storage
tank
Picture 3-2: Installation Layout 2
Installation:
1) Place the machine SAL-810G/820G/830G at a proper position on the ground,
connect the three phase power cord and the earth.
2) Install the material hopper on the top of hopper dryer, and connect the signal
to the machine SAL-810G/820G/830G.
3) Use the steel wire hose, connect the air inlets of SMH to corresponding air
inlets of SAL-810G/820G/830G. Then connect the other air inlets of SMH to
the air inlets storage tank with hose .
