Shini SAL-430, Инструкция по эксплуатации

Страница: 15 / 29

15(29)
2. Pipe connection
As picture, mount the loader onto the hopper dryer and lock with screws.
Connect one end of the material pipe to inlet of loader and insert another
side to the storage tank.
3. Electrical Circuit Connection of SAL-430 / 460
Please connect SAL-430 / 460 series 230V model of machines with AC 3
Φ
,
230V 50Hz power supply and earth wire, and for SAL-430 / 460 series 400V
model, please connect it with AC 3
Φ
, 400V 50Hz power supply and earth
wire.
Please make sure that the main power is shut off when you
connect the machine with power supply!
3.2 Installation Space
During installation of the machine, keep at least 1m installation space around
the machine as shown by the picture.
Do not install the machine in a position crowded with other objects. This would
cause inconvenience to operation, maintenance and repair.
Do not sit on the machine.
Keep away flammable and explosive goods.
Picture 3-2: Installation Space