Shindaiwa DGW300MS, Руководство владельца и оператора

Страница: 32 / 40

- 29 -
Danger : Electric Shock
Do not operate the equipment, if the equipment or you are wet.
Before performing any equipment check or maintenance, stop the engine.
Caution : Injuries
When performing equipment check and maintenance, always stop the engine.
Caution : Fire
・ ・ ・ ・
Burns
When checking engine, always stop the engine, and keep away from fire.
Temperature around engine, muffler and exhaust can get extremely high.
Wait until the engine cools down, before performing any checks.
13-1. Symptom and Countermeasures
Follow the guideline below, when performing any troubleshooting. If you cannot
resolve the problems by this troubleshooting guide, contact the authorized distributor
or service dealer to request the repair.
Symptoms Possible Cause Corrective Actions
Starter motor does
not start
1. Battery Isolator Lever is [OFF]
position
2. Weak Battery
3. Dead Battery 1. Turn Battery Isolator Lever to
[ON] position
2. Recharge Battery
3. Replace Battery
Engine does not
start
1. Fuel lever on fuel strainer or
water separator to [CLOSE].
2. Insufficient Fuel
3. Emergency Stop Switch keeps
pushed
4. Fuse burnt
5. Fuel is contaminated by the
water or dust
6. Fuel pump malfunction 1. Open the fuel lever for both
fuel strainer and water separator
2. Replenish fuel
3. Release the Emergency Stop
Switch
4. Repair the fuse
5. Drain water or clean fuel tank,
fuel strainer, and fuel separator
6. Repair the fuel pump
Engine starts, but
stalls immediately
1. Insufficient oil
2. High Water Temperature,
Insufficient coolant/water
3. Unable to charge 1. Replenish oil
2. Replenish coolant/water
3. Repair
Symptoms Possible Cause Corrective Actions
13
． ． ． ．
Troubleshooting