Shindaiwa DGW300MS, Руководство владельца и оператора

Страница: 29 / 40

- 26 -
<Caution>
Refer to
『
6-1. Checking Engine Oil
』
to select engine oil.
Change the packing, whenever changing oil.
Packing No.
：
6C090-58961 (Kubota)
After reinstalling the oil drain plug tightly, keep the engine drive for a while to
check no engine oil leakage and then stop the engine.
(2) Oil Filter Change
①
Drain the engine oil completely, as described
in
『
11 (1) Oil Change
』
.
②
Loosen and remove the oil filter, using an oil
filter wrench.
③
Smear a little engine oil on the rubber
gasket of a new filter.
④
Screw the new filter into place and tighten it
by hand until the gasket contact the seat.
Then, give it additional
『
1.1/4 Turn
』
to seat
the filter, using an oil filter wrench.
⑤
Supply oil and install the filler cap.
<Caution>
If an oil filter wrench is not available, contact our authorized distributor or service
dealers .
Oil Filter Part No.
：
15241-32090 (Kubota)
(3) Clean/Change Air Filter Element
Clean 1
st
50 hours and Every 100 hours afterwards
Replace Every 400 hours
①
Loosen the wing bolt to remove the cleaner cap.
②
Remove the air element.
③
Clean or replace the air cleaner element.
<The element is adhered with dried contaminants>
Blow up by compressed air from inside the element.
<The element is adhered with carbon or oil>
Replace to a new one.
④
Reinstall them in reverse order.
<Caution>
Clean more frequently, if it is used in dusty environment.
Element Part No.
：
67980-82632 (Kubota)
First Time 50 hour mark
2
nd
or after Every 200 hours
CLEANER CAP
WING BOLT
AIR CLEANER
ELEMENT
LEFT
DOOR
OIL
FILTER
RIGHT DOOR
AIR CLEANER