![Shindaiwa DGW200MS/UK Скачать руководство пользователя страница 28](http://html1.mh-extra.com/html/shindaiwa/dgw200ms-uk/dgw200ms-uk_operators-manual_1257637028.webp)
- 27 -
(1) Oil Change
①
Remove the oil plug.
②
Loosen the oil drain plug and allow the
oil to drain fully.
③
Reinstall the oil drain plug.
④
Checking the oil level by the oil level gauge, add oil into the oil filler (inlet) to fill
up to the max level (about 2.0 litre max).
③
Reinstall the oil plug hand tight.
<Caution>
Refer to
『
6-1. Checking Engine Oil
』
to select engine oil.
Whenever changing oil
,
change the seal as well,
Seal Part No. : 6C090-58961 (Kubota)
(2) Oil Filter Change
①
Drain the engine oil completely, as
described in
『
11-1. Oil Change
』
.
②
Remove the side cover.
③
Loosen and remove the oil filter,
using oil filter wrench.
④
Smear engine oil a little on the rubber
gasket in a new oil filter.
⑤
Screw the new filter into place and
tighten it by hand until the gasket contact
onto the seat. Then, give it additional
『
1.1/4 Turn
』
to seat the filter, using
a filter wrench.
⑥
Supply oil and install the filler cap.
<Caution>
If an oil filter wrench is not available to get,
contact our authorized distributor or our
dealer.
Oil Filter Part No.: 15853-32433 (Kubota)
First Time
50 hour mark
2
nd
or after
Every 100 hours
First Time
50 hour mark
2
nd
or after
Every 200 hours
OIL DRAIN PLUG
OIL FILTER
SIDE COVER
Содержание DGW200MS/UK
Страница 33: ...32 14 Engine Wiring Diagram...
Страница 34: ...33 15 Generator Wiring Diagram...
Страница 35: ......
Страница 36: ...2010...