Shindaiwa DGW200MS/UK, Руководство оператора

Страница: 17 / 36

- 16 -
7. Operation
Danger: Suffocation from exhaust fume
Exhaust fume from the engine contains many elements harmful to humans.
Do not operate this equipment in poorly ventilated areas, such as a room
or in a tunnel.
Caution: Suffocation from exhaust fume
Do not point the exhaust outlets toward pedestrians or building.
Caution: Fire
Temperature around muffler and exhaust can get extremely high.
Keep any inflammable items (such as fuel, gas, paint, etc.) away from the
equipment.
Always operate this equipment on flat surface and, at least 1 metre clearance
from any objects (wall, box, etc.)
Caution: Injuries
Always place the equipment on flat and stable surface, to keep the equipment
from sliding. Be sure to lock the wheels for the wheeled models.
When starting the engine, turn off the connected equipment and set the circuit
breaker to OFF position.
7-1. Start up
①
Turn the circuit breakers (MAIN CB, 15A, and 30A) to OFF.
②
Turn the fuel lever to OPEN.
③
Turn the Idle Control switch to AUTO.
④
Ensure the Emergency Stop Switch is positioned to release.
⑤
When the ambient temperature is below 5
℃
, turn the starter switch to
PREHEAT. The lamp goes off when preheating has finished in about 5
seconds.
⑥
Turn the starter switch to START and then the engine starts by the starter
motor.
⑦
Release the starter switch, as soon as the engine is started.
⑧
Keep the engine idling for around 5 minutes.
<Caution>
Do not turn the starter motor for more than 15 seconds successively.
If you need to restart, wait for 30 seconds or more before retry.
Once the engine has started, do not turn the starter switch to START.
STARTER SWITCH
IDLE CONTROL
SWITCH
PREHEAT LAMP
CURRENT ADJ. DIAL
OUTPUT RECEPTACLE
FUEL LEVER
OPEN
CLOSE
CIRCUIT
BREAKER
EMERGENCY
STOP SWITCH
ELCB
(MAIN CB)