18
5-6. Emergency Stop Switch
Press the emergency stop switch to stop the engine
immediately.
After pressing the emergency stop switch, return the starter
switch to the "STOP" position and turn the emergency stop
switch clockwise to reset.
5-7. Terminal Cover Switch
An automatic engine stop feature is incorporated in the equipment, if the left side terminal
cover is opened.
Before starting engine, be sure to close the terminal cover and tighten the bolt.
If the terminal cover remains open, the engine will not start or be restarted.
6-1. Transport Procedures
Warning : Injuries
Do not lift up by positioning handle. Doing so could cause the generator to fall.
No persons should ever be under a lifted generator.
Caution : Injuries
Always be sure to use the top-mounted lifting lug when lifting up the generator,
and raise it slowly at a completely vertical angle.
Wear a helmet, safety shoes, gloves and similar protective gear when
performing lifting work. Do not stand or get under the equipment while it is
suspended.
Do not move the generator during operation.
(1) Lifting Procedures
Always be sure to use the top-mounted lifting lug when lifting up the generator, and raise
it slowly at a completely vertical angle.
6. Transport/Installation
Stop
Reset
Terminal Cover Switch
Terminal Cover
Bolt (M6)
Содержание DG15BMK
