Shindaiwa DG15BMK, Руководство владельца и оператора

Страница: 45 / 52

40
1) Drain the spill from the containment.
2) Remove the seven installation bolts
(M8) of the spill containment.
3) Lift up the equipment body to
separate the spill containment and
set the equipment on a level surface.
4) Clean the inside of the spill
containment using a high-pressure
washer or similar equipment.
5) Drain the cleaning fluid from the spill
containment.
6) Remove any rust that has formed in
the spill containment and paint it
again.
7) Pour water into the spill containment
and check that there is no leakage.
(After checking, drain the water you
have used.)
8) Install the spill containment to the
equipment in the reverse order of
removal.
<Note>

Do not operate the equipment with
the spill containment separated.

If fluid drained from the spill containment during cleaning contains oily components,
dispose of it in a manner according to the applicable laws and regulations.

If the spill containment has a leak, request repair at the retail outlet where the equipment
was purchased.
Warning: Electric Shock/Injuries

Always be sure to stop the engine and remove the starter key before
performing any equipment check or maintenance. The person performing the
maintenance must always keep the key.

Do not operate the equipment with any doors or covers open, and always lock
them. There is a danger of hair, body parts and other items being caught up in
moving parts such as cooling fans and belts.

Do not modify the equipment and do not operate with parts removed.
Warning: Fire

Always be sure to stop the engine when inspecting fuel or refueling, and
absolutely never perform such tasks near fire, open flames or sparks. Wait
until the engine has completely cooled before inspecting fuel or refueling.

Always be sure to wipe away any spilled fuel or oil.

Spilled fuel and oil accumulates in the spill containment. Do not operate the
equipment with fluids accumulated in the spill containment.
11. Long-Term Storage
Bolt (M8)
・
Right: 4 bolts
・
Left: 3 bolts
Lifting Lug
Spill
Containment