background image

SAFETY

AH262

8

X7502342300

© 6/2017 ECHO Inc.

Proper Clothing

Wear snug-fitting, durable clothing:

• Pants should have long legs, shirts should have long sleeves.

• DO NOT WEAR SHORTS.

• DO NOT WEAR TIES, SCARVES, JEWELRY, or clothing with loose or 

hanging items that could become entangled in moving parts or 
surrounding growth.

• Keep clothing buttoned or zipped, and keep shirt tails tucked in.

Wear sturdy work shoes with nonskid rubber soles:

• DO NOT WEAR OPEN TOED SHOES.

• DO NOT OPERATE UNIT BAREFOOTED.

Keep long hair away from engine and air intake. Retain hair with cap or net.

Heavy protective clothing can increase operator fatigue, which may lead to 
heat stroke. Schedule heavy work for early morning or late afternoon hours 
when temperatures are cooler.

The components of this machine generate an electromagnetic 
field during operation, which may interfere with some 
pacemakers. To reduce the risk of serious or fatal injury, 
persons with pacemakers should consult with their physician 
and the pacemaker manufacturer before operating this 
machine. In the absence of such information, ECHO does not 
recommend the use of this machine by anyone who has a 
pacemaker.

Extended Operation / Extreme Conditions

Prolonged exposure to cold and/or vibration may result in 
injury. Read and follow all safety and operation instructions to 
minimize risk of injury. Failure to follow instructions may result 
in painful wrist/hand/arm injuries.

Содержание AH262













































Отзывы: