OPERATION
AH262
24
X7502342300
© 6/2017 ECHO Inc.
Note: If engine does not start after 5 pulls, use Cold Start
Procedure.
Stopping Engine
1.
Throttle
Release throttle trigger and
allow engine to return to idle
before shutting off engine.
2.
Stop Switch
Move stop switch (A) to STOP
position.
If engine does not stop when stop switch is moved to STOP
position, close choke - COLD START position - to stall engine.
Have your dealer repair stop switch before using unit again.
Hedge Trimming
Shoulder Harness (if included)
1.
Loosen harness clamp screw
(A).
2.
Put harness on and attach it to
harness clamp ring (B).
3.
Adjust harness for comfortable
operation.
4.
Tighten harness clamp screw
(A).
Hedge Trimmer blades are very sharp. Touching them may lead
to severe personal injury. Avoid touching blades whenever
possible, and always wear gloves to protect hands.
A
A
B
