AH262
MAINTENANCE
X7502342300
27
© 6/2017 ECHO Inc.
ENGLISH
*Replacement is recommended based on the finding of damage or wear
during inspection.
Air Filter
Level 1
1.
Close choke (COLD START [
] position). This prevents dirt from
entering the carburetor throat when the air filter is removed. Brush
accumulated dirt from air cleaner area.
2.
Remove air filter cover. Brush dirt from inside cover.
Assure throttle wire retaining clip
(A) remains in place as shown
when removing or installing air
filter cover.
3.
Remove foam pre-filter (B) and
air filter and clean as indicated
below:
4.
Foam Pre-filter.
5.
Clean foam filter in water/deter-
gent solution and rinse with
clean water.
• Wrap the filter in a clean, dry
cloth and squeeze (do not
wring) dry. Allow to dry com-
pletely before reuse. Do not
oil.
Air Filter
• Lightly brush debris from filter. Replace filter if it is damaged, fuel
soaked, very dirty, or the rubber sealing edges are deformed.
6.
Assemble components in reverse order.
Parts Required:
Tune Up Kit.
A
B
