AH262
MAINTENANCE
X7502342300
35
© 6/2017 ECHO Inc.
ENGLISH
2.
Pull the drive shaft (C) from the
housing, wipe clean, then apply
15 ml (0.5 oz.) of grease.
3.
Slide the drive shaft back in the
drive housing being careful not
to get dirt on the flex shaft.
4.
Install the gear housing
assembly.
Blades
Hedge trimmer blades are very sharp, touching them may lead
to severe personal injury. Use long hex wrenches and sockets
with extensions when tightening blade screws and blade lock
nuts to keep hands at a safe distance from sharp blades.
Blades should only be removed and reinstalled by an authorized
servicing dealer, otherwise premature wear or internal damage may
occur.
Sharpening
Level 2.
If a power grinder is used DO NOT allow blade to over heat.
C
