AH262
SAFETY
X7502342300
11
© 6/2017 ECHO Inc.
ENGLISH
Cutting Angle Adjustments
• Only adjust cutting blade angle
with unit flat on the ground,
with the engine stop switch in
the “STOP” position. Never
adjust cutting angle with unit
standing upright.
Avoid Contact With Gear
Box Assembly During Use
• Gear box assembly becomes
hot during use. Avoid contact
with gear box assembly when
using unit or making cutting
angle adjustments.
Avoid Hot Surfaces
• Keep exhaust area clear of flammable debris. Avoid contact during and
immediately after operation.
Never perform blade maintenance procedures while engine is
running.
Equipment
Use only Shindaiwa attachments. Serious injury may result from
the use of a non-approved attachment combination. ECHO, INC.
will not be responsible for the failure of cutting devices,
attachments or accessories which have not been tested and
approved by ECHO, INC. Read and comply with all safety
instructions listed in this manual and safety manual.
