background image

3

 

  WARNING!

   

   Use Good Judgment

ALWAYS

 wear eye protection to shield 

against thrown objects.

NEVER

 run the engine when  

transporting the unit.

NEVER

 run the engine indoors! Make 

sure there is always good ventilation. 

Fumes from engine exhaust can cause 

serious injury or death.

ALWAYS

 clear your work area of trash 

or hidden debris that could be thrown 

back at you or toward a bystander.

ALWAYS

 use the proper cutting tool for 

the job.

ALWAYS

 stop the engine immediately 

if it suddenly begins to vibrate or shake. 

Inspect for broken, missing or improp-

erly installed parts or attachments.

NEVER

 extend trimming line beyond 

the length specified for your unit.

ALWAYS

 keep the unit as clean as 

practical. Keep it free of loose  

vegetation, mud, etc.

ALWAYS

 hold the unit firmly with both 

hands when cutting or trimming, and 

maintain control at all times.

ALWAYS

 keep the handles clean.

ALWAYS

 disconnect the spark plug 

wire before performing any  

maintenance work.

ALWAYS,

 if a saw blade should bind 

fast in a cut, shut off the engine  

immediately. Push the branch or tree to 

ease the bind and free the blade.

Safety Instructions

The Properly Equipped Operator

Always operate with both hands 

firmly gripping the unit.

Wear close-fitting clothing to pro-

tect legs and arms. Gloves offer 

added protection and are strongly 

recommended. Do not wear 

clothing or jewelry that could get 

caught in machinery  

or underbrush. 

Secure hair so it is 

above shoulder 

level. NEVER 

wear shorts!

Wear hearing protection devices 

and a broad-brimmed hat or 

helmet.

Always wear eye protection such as 

goggles or safety glasses.

Keep away from the rotating  

trimmer line or blade  at all times, 

and never lift a moving attachment 

above waist-high.

Wear appropriate footwear (non-skid boots 

or shoes): do not wear open-toed shoes or 

sandals. 

Never operate the unit while 

barefoot!

Keep a proper footing 

and 

do not over-

reach—maintain your 

balance at all times dur-

ing operation.

Always make sure the  

appropriate cutting attachment 

shield is correctly installed and in 

good condition.

Figure 1

Always 

wear a shoulder strap or a harness when oper-

ating a unit equipped with a blade.

Содержание 81188









































Отзывы: