Built-in type
Depending on the frame, it may be installed at a location different from the position specified in this section.
BM-EN800 / BM-EN801
The SHIMANO original tool can be used to easily determine the installation location for the key unit.
Use the appropriate SHIMANO original tool according to the battery that is used.
Install the upper case.
0.6 N·m
0.6 N·m
Bellows
Upper case
Power cord
Upper case mounting screw B (M3 x 9 mm)
(3)
(2)
(1)
Lower case
Upper case mounting screw A (M3 x 5 mm)
(3)
Pass the power cord from the upper case through the hole in the lower case.
(1)
Set the upper case to the lower case.
* Make sure that the bellows on the base of the power cord is exposed from below the lower case.
(2)
Secure the upper case.
(3)
Pass the power cord through the frame and leave it hanging over the drive unit installation area.
(4)
5.
When the battery is the BT-EN805: TL-BME04
When the battery is the BT-EN805-L or BT-EN806: TL-BME05
Installation/removal
Installing the battery mount
32
Содержание Non BM-EN400-A
Страница 4: ...TO ENSURE SAFETY TO ENSURE SAFETY 4...
