External type
Depending on the frame, it may be installed at a location different from the position specified in this section.
BM-EN600
The SHIMANO original tool TL-BME02 can be used to easily determine the installation location for the key unit.
Install the battery mount to the rear carrier.
Set the battery mount aligned with the mounting hole on the rear carrier.
(1)
Secure the battery mount. Use the bicycle manufacturer's standard tightening torque.
(2)
After installing the battery mount, perform the following:
Firmly close the charging port cap.
Pass the power cord through the frame and leave it hanging over the drive unit installation area.
Charging port cap
Battery mount mounting screw (M5)
(3)
Battery mount mounting screws (M5) for the battery mount are not included with SHIMANO
products. Use the screws supplied by the bicycle manufacturer. Contact the bicycle manufacturer for
the tightening torque.
4.
Installation/removal
Installing the battery mount
26
Содержание Non BM-EN400-A
Страница 4: ...TO ENSURE SAFETY TO ENSURE SAFETY 4...
