Be sure to also inform users of the following:
Be sure to follow the instructions provided in the manuals when installing the product.
Only use SHIMANO genuine parts. If a component or replacement part is incorrectly assembled or adjusted, it
can lead to component failure and cause the rider to lose control and crash.
Wear approved eye protection while performing maintenance tasks such as replacing components.
For information on products not explained in this manual, refer to the manuals provided with each product.
Do not insert or remove the plug while it is wet. Doing so may result in electric shock. If the inside of the plug
is wet, dry it thoroughly before inserting it.
Do not recharge the battery in wet or very humid places, or outdoors. (EC-E6002)
Do not recharge the battery in wet or very humid places. (EC-E8004)
A fire, ignition, overheating, or electric shock may occur.
Handling the battery
If any liquid leaking from the battery gets into your eyes, immediately wash the affected area thoroughly with
clean water such as tap water without rubbing your eyes, and seek medical attention immediately. If this is
not done, the battery liquid may damage your eyes.
Do not use it outside of the operating temperature range of the battery. If a battery is used or stored in
temperatures which are outside these ranges, fire, injury or problems with operation may occur.
During discharge: -10 - 50°C
(1)
During charging: 0 - 40°C
(2)
Do not use the battery if it has any noticeable scratches or other external damage. If this is not observed,
bursting, overheating or problems with operation may occur.
Do not use the battery if leakages, discoloration, deformation, or any other abnormalities occur. If this is not
observed, bursting, overheating or problems with operation may occur.
Handling the battery charger
Be sure to hold the power plug when connecting or disconnecting from the electrical outlet. Failure to do so
may cause a fire or electric shock. If the following symptoms are observed, stop using the device and contact
the place of purchase. A fire or electric shock may be caused.
If heat, acrid-smell, or smoke is coming out from the power plug.
There may be a bad connection inside the power plug.
Do not touch the metallic parts of the device or the power plug on the AC adapter or other parts if there is a
*
*
TO ENSURE SAFETY
6
Содержание Non BM-EN400-A
Страница 4: ...TO ENSURE SAFETY TO ENSURE SAFETY 4...
