Removing the electric wire (EW-SD50)
Installing the battery mount
Rear carrier mount type
BM-EN400
Remove the electric wire.
* As shown in the figure, use part (A) of the TL-EW02 as a fulcrum, move the tool like a lever, then
disconnect the plug part. If there is limited space to insert the tool, lift the TL-EW02 straight up and
disconnect the electric wire.
(1)
(2)
(A)
Insert the TL-EW02 into the groove on the plug of the electric wire.
(1)
Disconnect the electric wire from the E-TUBE port.
(2)
1.
Install the key unit to the lower case.
Key unit mounting screw A (one-way type)
Key unit mounting screw B
Key unit
1.6 - 1.8 N·m
1.6 - 1.8 N·m
Lower case
1.
Installation/removal
Installing the battery mount
23
Содержание Non BM-EN400-A
Страница 4: ...TO ENSURE SAFETY TO ENSURE SAFETY 4...
