10
< 8-gear hub >
Place right hand dust cap C or B onto the driver on the right side
of the hub body. Next, install the sprocket and secure it in place
with the snap ring.
Specifications
Applicable sprockets
Outward
assembling
Inward
assembling
A
16T - 23T
20T - 23T
B
16T - 23T
Note:
•
For A specifications: If the sprocket is an inward assembling
sprocket with 19T or less or for belt drive specifications, right
hand dust cap A will come into contact with the chain or pulley
and so B specifications should be used instead.
•
For B specifications: If the sprocket is an inward assembling
sprocket with 16T and 3 mm teeth or for belt drive
specifications, remove right hand dust cap B before use.
Snap ring
Sprocket
Note the
direction
A specifications:
Right hand dust cap C
B specifications:
Right hand dust cap B
A specifications:
Right hand dust cap A
B specifications:
Right hand dust cap A
Driver
