27
ADJUSTMENT
Adjusting the cassette joint
1.
Set the REVOSHIFT lever / shifting lever to
1
.
REVOSHIFT
< REVOSHIFT Lever >
1
Set to
1
RAPIDFIRE Plus
< Shifting Lever >
1 ..4 ..7
Set to
1
2.
Set the REVOSHIFT lever / shifting lever as shown in the illustration.
REVOSHIFT
< REVOSHIFT Lever >
4
7-gear/8-gear hub: Set to 4
5-gear hub: Set to 3
RAPIDFIRE Plus
< Shifting Lever >
1 ..4 ..7
7-gear/8-gear hub: Set to 4
5-gear hub: Set to 3
Check that the yellow setting lines on the cassette joint bracket
and pulley are aligned with each other at this time. If the
overlapping area falls short of two thirds of each setting line, the
gears may not be properly engaged during pedaling, resulting in
abnormal noise or free spinning of the pedals.
LOCK
Yellow setting lines
The overlapping area falls short
of two thirds of each setting line.
•
The yellow setting lines on the cassette joint are located in two places. Use the one that is easiest to see.
