manualshive.com logo in svg

Shimadzu UW2200HV, Инструкция по эксплуатации

Поделиться
Скачать
Shimadzu UW2200HV Скачать руководство пользователя страница 50

34

7.  Menu Item Selection

7.5 Related Useful Functions

7.5.1

Last Menu Recall

This function is convenient when an application requires frequent changes to a specific menu item.
During mass display or menu selection, press and hold the 

[CAL]

 key for approximately three sec-

onds. The last menu item that was changed or set is displayed.

7.5.2

Returning to the Default Settings (menu reset)

The procedure below describes how to reset the menu and return to the default settings.
Default settings are indicated with the 

∗

 symbol in the Menu Map. 

Select menu item 

  to reset the menu.

1

In the gram-display, press the 

[CAL]

 key

repeatedly until the “S” of “SEL:EAUS” blinks.

2

Press the 

[O/T]

 key. The Menu Group 6 is

selected.

3

Press the 

[CAL]

 key repeatedly until the “r” in

“S-dtSCr,” is blinking.

4

Press the 

[O/T]

 key to display “rESEt?” (“?”

without the dot).

5

Press the 

[O/T]

 key again. “rESEt” is displayed

to indicate menu reset completion.

6

Press the 

[POWER]

 key several times (or hold

it for approximately 3 seconds) to return to the
gram-display.

72

   Notes

• The settings made in 

“15.4 Decimal Point Symbol in Output Data”

 and

“8.2 Date Output Style”

 are not be cleared with Menu reset.

• Environmental setting of Pouring mode (

11.2

) is not cleared with Menu

reset.

• Operational condition setting of Animal Weighing mode (

14.6

) returns to

the default (Cond 1).

Содержание UW2200HV



































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды