Shimadzu UW2200HV, Инструкция по эксплуатации

Страница: 52 / 130

36
8. Built-in Clock Set-up
Read Chapter 7 Before Use of
These Pages
8. Built-in Clock Set-up
The built-in clock has to be set up in advance if a calibration record is to be produced or Clock-CAL
function is to be used.
8.1 Date
1
Select menu item and set the last two fig-
ures of the year, month and day, using the [UNIT]
and [PRINT] keys.
Example:May 15 th , 2002, set as “02.05.15”
Example:February 29 th , 2004, set as “04.02.29”
2
Then press the [O/T] key.
8.2 Date Output Style
The order of the year, the month and the date in the external output can be selected from three styles.
The setting made here is not reflected on the display of the balance.
To output in the YYYY-MM-DD order, select menu item . [y.m.d]
To output in the DD-MM-YYYY order, select menu item . [d.m.y]
To output in the MM-DD-YYYY order, select menu item . [m.d.y]
63
(Example)
Notes
• The built-in clock corrects for the leap year automatically.
• The moment the
[O/T] key is pressed to finish setting, seconds are set
to zero. If the is set after setting the time, the second value will be incor-
rect. It is important to set the first and then the time, or to correct the
seconds value using the
±
second correcting function described in sec-
tion 8.3.
Notes
The setting made here on “Date Output Style” will not be cleared with
Menu reset (See
7.5.2 ).
63a
63b
63c