Shimadzu UW2200HV, Инструкция по эксплуатации

Страница: 73 / 130

57
13. Enhancing Productivity
Read Chapter 7 Before Use of
These Pages
Upper threshold
<
Sample weight HI
Lower threshold
≤
Sample weight
≤
Upper threshold GO
Sample weight
<
Lower threshold LO
13.1.3 Target Mode
This mode is useful for constant amount weighing of liquid or judgment of excess and shortage.
The target value is the numeric value that is the desired amount in the unit that is used for weighing.
The limit value is the numeric amount above or below the target value that is acceptable. The target will
be indicated as the center line in the analog display. The limits will be indicated as triangle marks. A
moving bar represents the current weight on the pan.
1
Select the Target mode with menu item .
2
Set the “target” value, which corresponds to the
center line of the graphic display, with menu item
.
3
Set the “limit” value, which corresponds to the
distance between the center line and upper or
lower triangle marks, with menu item
.
Note
The decimal point is invisible in each value setting display. Setting the
value cannot be made in gram unit. Determine the number based on the
minimum display of the balance. For example, if the balance’s minimum
display is 0.01g, 150g (150.00g in this balance) must be set by inputting
“15000” in the display, not “150” or “150.00”.
Without load With a load within
the limit range
Display examples in use
←
target
→
12
13
14
Note
The decimal point is invisible in each value setting display. Setting the
value cannot be made in gram unit. Determine the number based on the
minimum display of the balance. For example, if the balance’s minimum
display is 0.01g, 150g (150.00g in this balance) must be set by inputting
“15000” in the display, not “150” or “150.00”.