Shimadzu UW2200HV, Инструкция по эксплуатации

Страница: 72 / 130

56
13. Enhancing Productivity
Read Chapter 7 Before Use of
These Pages
13.1.1 Checkweighing (Comparator) Display Type 1
This is the best mode to determine pass or failure judgment based on the sample weight.
1
Select menu map item .
2
Set the upper threshold value, which corresponds
to the upper triangle mark, with menu item .
3
Set the lower threshold value, which corresponds
to the lower triangle mark, with menu item .
13.1.2 Checkweighing (Comparator) Display Type 2
Use this mode for classification based on the sample weight. The display looks like a bar graph, but
also includes a checkweighing function.
1
Select menu map item .
2
Set the upper threshold value, which corresponds
to the upper triangle mark, with menu item .
3
Set the lower threshold value, which corresponds
to the lower triangle mark, with menu item .
Displays in use
15
16
17
Note
The decimal point is invisible in each value setting display. Setting the
value cannot be made in gram unit. Determine the number based on the
minimum display of the balance. For example, if the balance’s minimum
display is 0.01g, 150g (150.00g in this balance) must be set by inputting
“15000” in the display, not “150” or “150.00”.
Note
Determination as follows:
Upper threshold
<
Sample weight HI
Lower threshold
≤
Sample weight
≤
Upper threshold GO
Sample weight
<
Lower threshold LO
Displays in use
18
19
20