50
■
Recording in the External Trigger Mode [External SEPARATE]
This mode is a combination of the external standby and external trigger modes. It is used
to record images after the camera has been in standby a long time.
In "Selecting the Recording Mode in [REC] – [MODE]" in 5.4.1 Setting Recording
Parameters, specify the external trigger mode [External SEPARATE] to use as the
recording mode. Then click [REC]. The window in Fig. 5-16 is displayed and the system
waits until standby and trigger signal inputs are detected. About 850 ns after the standby
signal is input, it starts waiting for the trigger signal. After the trigger signal is detected, it
records the specified number of frames.
To not record or to stop recording before it is finished, click [REC STOP].
After the external signal (standby OFF) and external signal (trigger) are input and
recording is finished, the image specified in "Selecting First Frame to Display" in 5.5
Playing Back Images, is displayed in the Viewer window.
■
Recording in the Continuous External Trigger Mode [R-External
STANDBY]
This mode allows repeatedly recording frames using the external standby mode [External
STANDBY]. It starts recording when a standby signal is input and reads the image data
after recording is finished. Then it immediately starts waiting for input of the next standby
signal to repeat the process.
In "Selecting the Recording Mode in [REC] – [MODE]" in 5.4.1 Setting Recording
Parameters, specify the continuous external trigger mode [R-External STANDBY] to use
as the recording mode. Then click [REC]. The window in Fig. 5-16 is displayed and
recording remains in standby mode until a standby signal is input. To not record or to stop
recording before it is finished, click [REC STOP].
After the external signal (standby OFF) input and recording finishes, the image specified
in "Selecting First Frame to Display" in 5.5 Playing Back Images, is displayed in the
Viewer window. Then the window in Fig. 5-16 is displayed and recording starts in standby
mode waiting for an external signal (standby OFF).
The "NOW RECORDING…" window shown in Fig. 5-16 indicates the current number of
times recording was performed.
■
Recording in the Continuous External Trigger Mode [R-External TRIG]
This mode allows repeatedly recording using the external trigger mode [External TRIG].
Clicking [REC] starts recording with the camera in standby mode waiting for a trigger
signal. After a trigger signal is input, it records the specified number of frames and reads
the image data. Then it immediately starts waiting for input of the next trigger signal to
repeat the process.
In "Selecting the Recording Mode in [REC] – [MODE]" in 5.4.1 Setting Recording
Parameters, specify the continuous external trigger mode [R-External TRIG] to use as the
recording mode. Then click [REC]. The window in Fig. 5-16 is displayed and the system
waits until an external trigger signal input is detected. To not record or to stop recording
before it is finished, click [REC STOP].
After the external trigger signal input and recording finishes, the image specified in
"Selecting First Frame to Display" in 5.5 Playing Back Images, is displayed in the Viewer
window.
Then the window in Fig. 5-16 is displayed and recording starts in standby mode waiting
for an external trigger signal. The "NOW RECORDING" window shown in Fig. 5-16
indicates the current number of times recording was performed.
