Shimadzu BL2200H, Инструкция по эксплуатации

Страница: 11 / 38

-3-
2. INSTALLATION
Check power
voltage
•
Use only the AC adapter that supplys the output of 12VDC or the
AC adapter provided by the distributor who is authorized by
Shimadzu Corporation.
•
Check the power supply voltage.
•
Check that the supplied power voltage satisfies the displayed value
on the AC adaptor.
•
In order to prevent electric shock when connecting the power, use
a 3P plug with a grounding line or a 2P plug after connecting the
grounding wire to the screw at the back of the case.
•
Do not place anything that makes it difficult to pull the AC adapter
off the outlet.
Installation
site
Avoid installing the balance in a place where:
•
It is exposed to corrosive gas or flammable gas;
•
It is exposed dust, wind, vibration, electromagnetic waves, or a
magnetic field;
•
It is exposed to direct sunlight or a sudden change in temperature;
or
•
It is exposed to extremely high or low temperature or humidity.
Installation (1) Remove the protection seals (4 places)
from the protection cover and then put
it on the balance body.
(2) Turn the level screw so that the air
bubble on the level gauge is positioned
at the center of the red circle. Make
sure that the balance never jolt.
For easy adjustment, insert the level
screw on the right back forcibly to the balance body. Then while
lightly pressing the balance top with your hand, adjust the horizontal
level with the level screws on the right front and left front.
Finally, in order to make the balance stable, adjust the right back
screw to touch the floor.
This procedure allows you to level the balance quickly.
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
CAUTION
NOTICE
NOTICE
NOTICE