background image

2-2. Mounting

(1) Machine the mounting hole by referring to panel cutout in section 2-4.
(2) Applicable thickness of the mounting panel is from 1.0 to 3.5mm.
(3) As this product provides mounting fixture, insert the product from the front panel for installation.

2-3. How to remove the instrument out of the case

-

4 -

When the instrument is removed/replaced in the case, make sure the power is off. If it is done while the power is on, it may lead to
problems with the product and/or other problems.

CAUTION

There is no need to remove your SR70 series controller out of 
the case. Nevertheless, should the need arise, for example, 
for replacement, follow the steps described below:

Insert a minius screwdriver of 6mm

~

9mm into the opening

(where packing is exposed) of the front case and rotate the
screwdriver while pushing up the lock lever behind the
packing. Once the instrument comes out by a few 
millimeters, you can remove it by hand.

2-4. External dimensions and panel cutout

SR71 External dimensions (unit: mm)

SR72 External dimensions (unit: mm)

SR73 External dimensions (unit: mm)

SR74 External dimensions (unit: mm)

Dimension of current transformer (CT) for heater break alarm

30A (CTL-6-S) (unit: mm)

SR71 Panel cutout (unit: mm)

SR72 Panel cutout (unit: mm)

SR73 Panel cutout (unit: mm)

SR74 Panel cutout (unit: mm)

50A (CTL-12-S36-8) (unit: mm)

48

44.7

110
100

10

longer than 60

longer than

60

longer than

100

45

72

67.6

110
100

10

96

91.6

110
100

10

longer than 100

68

92

+0.8
  0

96

48

91.6

44.6

110
100

10

45

+0.6
  0

92

+0.8
  0

+1
  0

92

+0.8
  0

(48 

× 

N-3)

ø 5.8

25

3

10.5

21

30
40

10

2— ø 3.5

40

ø 2.36

 ø 12

2-M3 depth4

30
40

15

7.5

longer than

130

longer than 130

longer than 130

When N pieces are installed laterally
  N=number

45

+0.6
  0

+0.6
  0

68

+0.7
  0

+0.7
  0

92

+0.8
  0

ENT

PV

SV 

˚C

•••                        •• •• •••••

•••••••••••••••

•••••

Содержание SR70 Series

















Отзывы: