SHERCO XY 125, Руководство пользователя

Страница: 49 / 102

50 50
Maintenance processes
Seat
To remove the seat:
- Remove the 2 side bolts from the rear.
- Slide the seat backwards to release the front
centre bolt .
To refi t, proceed in reverse order to removal.
- Anchor the front seat to the centre bolt at the
front .
- Refi t the 2 side bolts at the rear.
Keep the seat clean and in good condition to pre-
vent slipping.
ATTENTION
Position of the front brake lever
In order to be able to pull on the lever properly du-
ring the braking operation, the position of the lever
needs to be adapted to the physique of the rider.
To alter the position:
- Loosen the 2 screws on the lever-reservoir
assembly .
- Sit on the seat.
- Place your feet on the footrests.
- Place your hand on the lever and position it as
desired.
- Secure the position by tightening the two
screws .
To change the distance between the lever and the
throttle twist-grip:
- Screw or unscrew the threaded screw .
Turn to the right for a SHORTER DISTANCE.
Turn to the left for a LONGER DISTANCE.
After changing the position, check and adjust the
play in the front brake.
ATTENTION
WARNING
The hand should be in a relaxed po-
sition and able to apply pressure on
the lever.
B
B
B
A
A
A
A
A
B
A
A
A