SHERCO XY 125, Руководство пользователя

Страница: 55 / 102

56 56
Maintenance processes
Checking and topping up the front brake fl uid
Bleeding the front brake fl uid
The front brake reservoir is located next to the
brake lever. It is fi tted with an inspection window for
checking the fl uid level.
To inspect it correctly, make sure the motorcycle is
in an upright position.
To top up the fl uid:
- Remove the two screws from the reservoir
cover.
- Remove the internal rubber.
- Top up the fl uid.
Type of brake fl uid: DOT4.
The brake fl uid level must be between 3 and 4 mm
from the top edge.
To bleed the front brake system:
- Remove the reservoir cover (see previous section).
- Remove the black protective cap .
- Press in the front brake lever and hold it in.
- Slightly loosen the protected device with the
black bleeding nipple positioned next to the hose
attachment.
- Repeat various times until the air has been eli-
minated from the circuit.
- Refi t the black protective cap .
- Refi t the reservoir rubber and cover.
Place a cloth under the bleed nipple to absorb the
fl uid.
Brake fl uid is highly corrosive, therefore remove any spillage that may have come into contact with
parts of the motorbike.
WARNING
WARNING
WARNING
TIP
A
C
B
A
A
A
A
B
C