SHERCO 2014 250 SEF-R, Руководство по ремонту

Страница: 29 / 75

Removing the rotor:
•
Utilize the special ro
number 4753.
•
Remove the rotor fixing nut.
•
Remove the flywheel using special tool
number R462.
•
Remove the two starter shafts along with
the starter gears.
•
Remove the oil centrifuge (anti blowby
Attention the threads this screw are LH,
do not turn the wrong direction.
Remove the freewheel gear.
Inspect the freewheel and the needle bearings:
•
Visually inspect the caged needle bearings.
•
Replace if necessary.
•
Inspect the track of the freewheel gear.
•
Replace the freewheel gear
•
Dismount the free wheel from the rotor by
loosening the 8 M5 screws.
•
Inspect the free wheel housing.
•
Replace if necessary.
•
Finally check the rollers on the freewheel.
•
Replace if necessary.
If the freewheel must be replaced then
the rest of the gears must be replaced and vice
versa.
l rotor holding tool
Remove the rotor fixing nut.
wheel using special tool
Remove the two starter shafts along with
oil centrifuge (anti blowby)
Attention the threads this screw are LH,
not turn the wrong direction.
Inspect the freewheel and the needle bearings:
Visually inspect the caged needle bearings.
Inspect the track of the freewheel gear.
the freewheel gear if necessary.
ismount the free wheel from the rotor by
loosening the 8 M5 screws.
Inspect the free wheel housing.
Finally check the rollers on the freewheel.
If the freewheel must be replaced then
ust be replaced and vice
29/75