shelolab SLFHP522-H, Инструкция по установке и эксплуатации

Страница: 13 / 44

13 | P a g e
INSTALLATION
H
ARDWIRE
R
EQUIREMENT
The oven requires permanent connect wiring (commonly known as hardwiring). Wiring to the power
source must be performed by a qualified electrical technician. All other Installation steps may be
performed by the end-user.
I
NSTALLATION
P
ROCEDURE
C
HECKLIST
For installing the unit in a new workspace location.
Pre-Installation
 Check that the required ambient conditions for the oven are met, page 14.
 Check that the spacing clearance requirements are met, page 14.
•
Unit dimensions may be found on page 41.
 Check that a suitable permanent connect electrical power supply is present,
page 15.
Install the oven in a suitable workspace location

Review the lifting and handling instructions, page 16.

Make sure the oven is level, page 17.

Install the oven in its workspace location, page 17.
• The oven may be connected to its power supply after this procedure.
Set up the oven for use
 Clean the unit and shelving (recommended), page 17.
 Install the shelving, page 18.