shelolab SLFHP522-H, Инструкция по установке и эксплуатации

Страница: 26 / 44

26 | P a g e
OPERATION
P
UT THE
O
VEN INTO
O
PERATION
Perform the following steps and procedures to put the unit into operation after installing it in a new
workspace environment.
The oven is now ready for use.
1.
Power the Oven
Place the oven Power Switch in the ON ( I ) position.
•
The controller display will illuminate, show the current
firmware revision number, and then default to the homepage.
2.
Set the High Limit Temperature
Use the Set the High Temperature Limit procedure on
page 27 to set the Limit heating cutoff to at least 10°C above
the highest intended temperature of your application.
3. Set the Operating Temperature
Read these procedures and descriptions.
Setting the Constant Temperature Setpoint . See the
procedure on page 28.
Program multistep heating recipes. See the description on
page 28.
Reminder : The intake and exhaust vents must be closed for the
oven to meet its temperature specifications.