Shaver Grand Slam, Руководство оператора и каталог запасных частей

Страница: 27 / 56

27
8. Pull up Safety Latch and pull back Main
Hydraulic Control Lever to raise Drive Ram.
Drive Ram, Hydraulic Control Valve Lever, & Safety
Lever.
9. Hold up Safety Latch and push Main
Hydraulic Control Lever to release the Drive
Ram and create impact with post. Continue
this process, as needed, to drive the post
to the desired depth.
Drive Ram, Hydraulic Control Valve Lever, & Safety
Lever.
IMPORTANT NOTICE
Posts will drive into the ground much straighter
using shorter strokes. Use caution when driving
small diameter wood and steel posts. Maximum
impact is not necessary with these smaller
diameter posts and can cause damage
(splintering or breakage) of posts.
NOTE : If the post stops going down or is
crooked after a few impacts, stop and move
the post to a different location. Conditions
such as thick sod, rocks, or tree roots can
cause splintered or broken posts.
10. Once a post is driven to the desired
depth, or the drive ram contacts the
ground, release the hydraulic control lever.
11. Open safety arm frame.
12. Raise the Post Driver and move to the next
location to begin driving a new post.
13. If traveling more than 100 feet, install road
lock pin in upper
“transport” position. The
Post Driver can now be moved to the next
work site or the storage location.
Dismounting Post Driver
1. Install road lock pin in upper
“storage”
position (lower hole is not used). The Post
Driver should be stored on a hard level
surface.
Road Lock Pin location (arrow).