Shaver Grand Slam, Руководство оператора и каталог запасных частей

Страница: 4 / 56

4
Safety
General
Safety of the operator and bystanders is one of t h e
main concerns in designing and developing a new
piece of equipment. Designers and manufacturers
build in as many safety features as possible.
However, every year many accidents occur, which
could have been avoided by a few seconds of
thought and a more careful approach to handling the
equipment.
Most work-related accidents are caused by failure to
observe basic safety rules or precautions, neglect, or
carelessness. An accident can often be avoided by
recognizing potentially hazardous situations before an
accident occurs. As you operate, or maintain the unit,
you must be alert to potential hazards. You should
also have the necessary training, skills, and tools to
perform any assembly or maintenance procedures.
Only properly trained people should operate this
machine. Improper operation and maintenance of this
unit could result in a dangerous situation that could
cause injury or death.
If you have any questions not answered in this
manual or require additional copies or the manual is
damaged, please contact your dealer or
Shaver Manufacturing Company
103 South Washington Avenue
P.O. Box 358
Graettinger, Iowa
51342
Phone: (712) 859-3293
Fax: (712) 859-3294
Website:
www.shavermfg.com
E-mail: sales@shavermfg.com
Do not use the unit until you read and
understand the information contained in
this manual.
Safety precautions and warnings are
provided in this manual and on the unit. If
these
warning instructions are not
followed, bodily injury or death could
occur to you or to other persons.
Shaver Manufacturing Company cannot
anticipate every possible circumstance that
might involve a potential hazard. The
warnings in this manual and on the unit are,
therefore, not all-inclusive. If a method of
installation or operation not specifically
recommended by us is used, you must
satisfy yourself that it is safe for you and for
others. You should also ensure that the unit
will not be damaged or be made unsafe by
the methods that you choose.
The information, specifications, and illustrations in
this manual are based on the information that was
available at the time this material was written and can
change at any time without notice.
Safety Alert Symbols
This is the safety alert symbol. It is used
to alert you to potential personal injury
hazards. Obey all safety messages that
follow this symbol to avoid possible injury
or death.
This manual contains DANGERS, SAFETY
INSTRUCTIONS, CAUTIONS, IMPORTANT
NOTICES,
and NOTES which must be followed to prevent the
possibility of improper service, damage to the
equipment, personal injury, or death. The following
key words call
the readers’ attention to potential
hazards.
Hazards are identified by the “Safety Alert
Symbol” and followed by a signal word such
as
“DANGER”, “WARNING”, or “CAUTION”.
Indicates an imminently hazardous situation
which, if not avoided, will result in death or
serious injury. This signal word is limited to the
most extreme situations .
Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
Indicates that equipment or property damage can
result if instructions are not followed.
Safety instructions (or equivalent) signs
indicate specific safety related instructions or
procedures.
Note: Contains additional information important to a
procedure.