Shaver Grand Slam, Руководство оператора и каталог запасных частей

Страница: 19 / 56

19
Document Storage Tube
Manual Storage Tube & mounting rivets.
1. If desired, locate the document storage
tube in a convenient location on the
Post Driver. The photo below shows the
tube mounted on the base plate, but
other locations are acceptable.
Manual Storage Tube mounted on Base Plate.
2. Mark the location of the two mounting
holes using the storage tube as a guide
(arrows above).
3.
Drill two 3/16” holes.
4. Attach the storage tube with the two pop
rivets supplied inside the tube.
Attachments and Options Assembly
Concrete Breaker Accessory
1. Position the Concrete Breaker to the
bottom of the Driving Ram as shown
below, without the mounting hardware
installed. Using Concrete Breaker as a
guide mark and drill mounting holes
(11/16
” diameter for CB-3/HD-12).
. Concrete Breaker CB-3 for HD-12 is shown mounted
2. Secure with supplied mounting hardware
as shown above.
Steel Post Holder Accessory
Steel Post Holders for HD-8 shown. Steel T-Post Holder on
left and Steel Square Post Holder on right.
Stabilizer (2 Foot) Extension Accessory
For driving 11-12 foot posts.
1. Drill two (2) holes (9/16 ” ) in foot plate of
Stabilizer as shown below.
HD-12 Springless mounting hole locations in Stabilizer Foot.