To mount the camera, you could use the 3 included screws to attach it to a wall or ceiling. The
included hex wrench can be used to turn the swivel joint in the preferred direction.
There are adjustments for rotating the camera, rotating the joint, and tilting the joint, allowing full
flexibility to set the viewing direction. The base can be mounted to a vertical or horizontal surface.
Some customers prefer not to show very obviously in which direction a camera is pointing. For that
reason, we now also have the matching mini dome model HTNC4503DM.
Note: the MicroSD slot and reset button are behind a cover at the bottom of the camera, towards the back.
For very high volume installations Sharx Security can offer an optional cable that plugs into a port next to
the MicroSD card and outputs a video signal that can go to a wrist mounted monitor, allowing installers to
complete the installation and adjustment of the preferred viewing angle in a single step.
