12 English
HOW TO USE
FILLING WATER TANK
1.
Unplug humidifier and place on level surface.
Note:
Spills can occur during cleaning, moving or refilling water tank, so be
careful to avoid spills.
2.
Remove water tank by grasping water tank handle and pulling toward you.
3.
Remove mist nozzle and set aside.
4.
Turn water tank upside down and remove cap (turn cap counterclockwise to
open).
5.
Fill water tank with cool tap water and replace cap (turn clockwise to close).
TIP:
If you have hard water or water with excessive minerals, we recommend
using distilled water to help reduce white dust and mineral buildup.
6.
Lower water tank into base, aligning the on front of water tank with the Power
Button. Once nested in position, outlet valve inside cap opens, releasing water
into base.
7.
Replace mist nozzle.
Note:
Any additives, such as aroma fragrances should not be used in the water
tank or base. These additives can cause cracks in the plastic of the humidifier
and may affect performance. Any use of such additives voids the manufacturer’s
warranty.
Before use, check humidifier for leaks and visible damage that may have
occurred during shipping.
DO NOT USE
if there is evidence of damage.
57
Français
1.
Appuyez sur ( ) to power unit on and off.
2.
Sélectionnez le réglage de brumisation souhaité en appuyant sur .
3.
Accédez au mode veille en appuyant sur .
TÉLÉCOMMANDE
Remarque:
Pour que le ventilateur tour
capte le signal de la télécommande, aucun
obstacle ne doit entraver la portée optique
de la télécommande. Placez le ventilateur
de façon que la lentille du récepteur soit
visible à partir de la télécommande.
