Sharp XE-A307 Скачать руководство пользователя страница 79

Страница: 79 / 146

■

You can program an upper limit amount and description for paid-out key.

Procedure

Program each item as follows:

• HALO (High Amount Lockout) (Use the numeric entry)

This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 9999999.99

NOTE

In the initial programming, the HALO function is
programmed as "INVALID".

• TEXT (Use the character entry)

Description for the paid-out key. Up to 12 characters can be
entered.

■

CID (Cash in drawer)

You can program the description and the upper limit amounts for cash in drawer (sentinel).

Procedure

Program each item as follows:

• HALO (High Amount Lockout) (Use the numeric entry)

This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 99999999.99

NOTE

• In the initial programming, the HALO function is

programmed as "INVALID".

• When the cash in drawer amounts exceeds a limit

amount, the sentinel mark (X) will be displayed.

• TEXT (Use the character entry)

Description for the cash in drawer. Up to 12 characters can be
entered.

■

CHK/CG (Check change)

You can program the description and the upper limit amounts for check change.

Procedure

Program each item as follows:

• HALO (High Amount Lockout) (Use the numeric entry)

This function is intended for prevention of accidentally entered
unreasonably amounts.
Limit amount: 0.00 to 999999.99

NOTE

In the initial programming, the HALO function is
programmed as "INVALID".

• TEXT (Use the character entry)

Description for check change. Up to 12 characters can be
entered.

Содержание XE-A307



















































































































































Результаты поиска

Содержание XE-A307

Отзывы:

Бренды по названию

Популярные бренды

Sharp XE-A307, Инструкция по эксплуатации

Результаты поиска

Содержание XE-A307

Отзывы:

Бренды по названию

Популярные бренды