VL-Z700S-T
VL-Z800S-S/E-S/E-T/Z900H-S
VL-Z950S-S/E-A/E-S/E-T/E-W
21
8-5-3. Method of combining the main chassis assembly and the slide chassis assembly
(1) Position the assemblies as shown in the figure below (the pole base is slightly protruded).
(2) Insert the operation pins (tension arm, Tu guide arm) of the slide chassis assembly into the locations of the main chassis assembly
shown in the figure below, fit the SL drive lever pin of the main chassis assembly into the groove of the slide chassis (the groove
of the slide adjustment ANG), and then fix with the two screws.
J
C
D
377
(22)Drum ass'y
371
(20)Swing arm ass'y
372
(21)Reel cover ass'y
D
I
1.
2.
Type
Tightening torque Q'ty
C
S Tight M1.4xL2.0
0.4mN·m
2
D
S Tight M1.4xL3.0
0.4mN·m
1
J
Wø2.1-ø4-t0.25
2
Type
Tightening torque Q'ty
D
S Tight M1.4xL3.0
0.4mN·m
1
I
Precision type 2·M1.4xL1.0
0.4mN·m
2