39
VL-Z700S-T
VL-Z800S-S/E-S/E-T/Z900H-S
VL-Z950S-S/E-A/E-S/E-T/E-W
(4) Camera signal system adjustment mode
In the camera signal system adjustment mode, the auto white balance function is stopped in order to adjust the camera. In this
mode, the white balance is set to the indoor mode and focussing is performed manually.
1) How to enter the camera signal system adjustment mode
Set the data value at address "0000" to " 00".
]
The camera signal system adjustment mode will be established.
*When the camera signal system adjustment mode is established, make adjustment according to "(5) Camera adjusting
procedure".
2) How to enter the normal mode
Set the data value at address "0000" to " FF".
]
The normal mode will be established.
]
Pressing "CONTINUE" key will make the display "CAM ADJ" disappear and make it possible to perform normal operation.
(5) Camera adjusting procedure
2. Basic adjustment of iris
1. Adjustment of auto focus
7. Adjustment of white balance
8. Adjustment of indoor white gain
9. Adjustment of color gain
3. Adjustment of black balance/Adjustment of A/F noise
4. Rough adjustment of iris AE
11. Adjustment of outdoor white gain
12. Adjustment of iris AE
5. Rough adjustment of white balance
6. Rough adjustment of color gain
10. Adjustment of auto white balance adjustment
* "1. Adjustment of auto focus" is performed in the auto focus adjustment mode. The other adjustments are performed in the camera
signal system adjustment mode.
(6) How to replace the gyro unit
1) When replacing the E
2
PROM on the main unit with the gyro unit kept unchanged
Because the gyro adjustment data is stored in the E
2
PROM, read the data at address "1064" and write it into the new E
2
PROM
after replacement.
2) When replacing the gyro sensor (RMC1001)
After replacing the gyro sensor with the specified one, write the following data at address "1064".
Ref No.
Part code
Address
Data
RMC1001
Changed to RSNSGA013WJ01Y
1064
01D0
