38
GENERAL INFORMATION
POWER SAVE MODES
Setting the power save modes
The auto power save control function can be enabled or disabled as
desired using user program No. 4. If this function is disabled, the time
that elapses before the copier enters a power save mode after any
operation is made can be set manually. This time is set with user
program No. 2 for the preheat mode and user program No. 3 for the
auto power shut-off mode. If the auto power save control function is
enabled, the settings of user programs No. 2 and No. 3 will be ignored.
For these settings, see page 31.
●
The copier will enter first the preheat mode and then the auto power
shut-off mode when no copier operation is made.
If the time set for the preheat mode is not shorter than that for the
auto power shut-off mode, the copier will enter only the auto power
shut-off mode when the time set for the auto power shut-off mode
has elapsed.
●
If the auto power shut-off timer is set using user program No. 3 when
the auto power shut-off mode has been disabled (program No. 20),
the auto power shut-off mode will be automatically enabled.
It is recommended that these power save modes be enabled for
energy saving.
Copying from the preheat mode
Make desired copier selections and press the print (
)
button using the normal copying procedure.
●
When any key input is made or any other copier operation is
made, the POWER SAVE (
) indicator will start to blink.
●
When the print (
) button is pressed, the READY indicator will
go out and copying will start within 10 seconds. The POWER
SAVE (
) indicator will go out when copying starts.
Copying from the auto power shut-off mode
1
Press the print (
) button.
●
The copier will exit the auto power shut-off mode and the
POWER SAVE (
) indicator will start to blink.
2
Make desired copier selections and press the print (
)
button using the normal copying procedure.
●
It will take approximately 35 seconds for the copier to start
copying. However, you can make desired settings and press the
print (
) button during warm-up. Copying will start after warm-
up is finished.
3
6
9
C
CA
ACC.#-C
Power save modes
3
6
9
C
CA
ACC.#-C
3
6
9
C
CA
ACC.#-C
Содержание SF-1116
Страница 68: ...66 OPTIONAL EQUIPMENT MEMO ...
Страница 69: ...67 OPTIONAL EQUIPMENT MEMO ...
Страница 70: ...68 OPTIONAL EQUIPMENT MEMO ...
Страница 72: ...PRINTED IN JAPAN 97K KS TINSE1653 FCZZ SF 1116 SF 1118 SHARP CORPORATION ...
