Sharp SF-1116, Руководство по эксплуатации

Страница: 33 / 72

31
GENERAL INFORMATION
Setting the user programs
1 Press and hold the TRAY SELECT ( ) key for more
than 5 seconds until all the alarm indicators* blink and
“– –” appears in the copy quantity display.
* The alarm indicators are the , , , , and
indicators.
2 Enter a program number using the 10-key pad.
● The selected program number will blink in the copy quantity
display.
●
If a mistake is made in steps 2 to 4, press the clear ( ) key.
You will return to step 2.
● The program numbers are shown in the table below.
For example, to change the setting of the auto clear time, press
key 1.
Program name Program No.
Auto clear time 1
Preheat mode 2
Auto power shut-off timer 3
Auto power save control 4
Stream feeding mode 5
Sorter bin access mode 7
Auditing mode 10
Account number entry 11
Account number change 12
Account number deletion 13
Number of copies per account 14
Resetting account 15
Auto power shut-off setting 20
3 Press the print ( ) button.
● For programs 1 to 7 and 20, the entered program number will be
steadily lit on the left side of the copy quantity display and the
currently selected parameter number for the program will blink
on the right side.
● For programs 10 to 15 (programs for auditing accounts), the
display varies with the program number. See page 33 for setting
programs 10 to 15.
USER PROGRAMS
User programs
ZOOM
1 2 3
4 5 6
7
8 9
0/ C
%
ZOOM
For operation of these programs after
step 3, see page 33.
%
ZOOM