Sharp PN-V601, Руководство по установке

Страница: 39 / 47

CONFIDENTIAL
PN-V601 Installation Guidelines <Rev1.4 > September.30, 2010
CONFIDENTIAL
38
- The color can be adjusted by the image adjustment function of the display by operating remote controller
or the control tool offered from our company. (Please refer to software tool, SHARP Monitor Control Software. )
- Also, it can be adjusted with the color calibration tool from our company. (Please refer to software tool, Multi Display
Calibration Tool). It is necessary to buy our recommended colorimeter. For the adjustment of one unit, it will take
about five minutes with 6-gradation adjustment of (our recommendation), about seven minutes with 16-gradation,
and about 10 minutes with 32-gradation.
- As the brightness of display is not steady immediately after the power*on, please adjust color 60 minutes or more
after the backlight is lit.
How to adjust the color
Color Adjustment Procedures for New Installation
Need set to a specific color
temperature and brightness
by using the colorimeter
YES
Need adjust the color with
the installation environment
NO
Color temperature and
brightness are have been
adjusted at factory
End of
Adjustment
Can adjust
Adjust with the color
calibration tool
End of
Adjustment
Can adjust
Fine-tunes with manual
adjustment for the gamma
value of the calibration
tool.
End of
Adjustment
* Basically, you don’t need to use the color calibration
tool for new installation.
End of
Adjustment
Colour Adjustment 1
Adjust with the image adjustment
function of the display