Sharp PN-HB651 Скачать руководство пользователя страница 30

Страница: 30 / 31

Confidential

For use by Sharp authorized dealers

and distributors only.

Not for general distribution.

PN-HB851/HB751/HB651/HM851/HM751/HM651 Installation Guidelines <Rev1.0> April. 2019

Cleaning of LCD surface

•Please wipe the LCD surface lightly with a soft cloth (lens cleaner and gauze, etc.).

Please ensure that the surface is not damaged with a hard cloth and do not rub strongly .

•Please use a static electricity removal brush (dustproof brush) commercially available when dust attaches

to the LCD.

•Please do not wipe with a damp or dusty cloth, in order to protect the LCD.

3.7 Maintenance & checking items

Maintenance & Checking Items

1. Daily maintenance

1-1. Cleaning of LCD surface
1-2. Monitoring operating conditions

2. Periodical maintenance

2-1. Checking the installation conditions. Checking the mounting bracket for the main units,

for loose mounting bolts and screws, etc.

2-2. Checking the peeling off of black tape to maintain good looking appearance between panels
2-3. For wire hanging installation, check wire condition.

For safety use, both daily and periodical maintenance are necessary.

Содержание PN-HB651
































Результаты поиска

Содержание PN-HB651

Отзывы:

Похожие инструкции для PN-HB651

Бренды по названию

Популярные бренды

Sharp PN-HB651, Руководство по установке

Результаты поиска

Содержание PN-HB651

Отзывы:

Похожие инструкции для PN-HB651

Бренды по названию

Популярные бренды