Confidential
For use by Sharp authorized dealers
and distributors only.
Not for general distribution.
PN-HB851/HB751/HB651/HM851/HM751/HM651 Installation Guidelines <Rev1.0> April. 2019
How to operate by remote control when unpacking the monitor
You can operate the remote control with the monitor standing on the bottom box with power code connection.
Remove the upper box and pull down the protection cover.
After removing the accessory box at the back, you can connect the power code to the
monitor by inserting your hand in the gap between protection cover and the monitor.
You can operate the remote
control by holding the remote
control sensor part to close to
the joint hole at the front left of
the bottom box.
AC Input Terminal
3.2 Operations by remote control when unpacking
23
