Sharp PN-40TC1 Скачать руководство пользователя страница 39

Страница: 39 / 50

Troubleshooting

If you are experiencing any problem with your display, before

calling for service, please review the following troubleshooting

tips.

There is no picture or sound.

• Is the power cord disconnected? (See page 13.)

• Is the main power switch off? (See page 17.)

• Is the monitor in standby mode (the power LED illuminating

in orange)? (See page 17.)

• Make sure correct input mode is selected. (See page 19.)

• If any external equipment is connected, make sure the

equipment is operating (playing back).

Remote control does not work.

• Are the batteries inserted with polarity (+,-) aligned? (See

page 15.)

• Are the batteries exhausted?

• Point the remote control unit toward the monitor’s remote

control sensor. (See page 15.)

• Is the remote control operation in MONITOR LOCK of

OTHERS menu enabled? (See page 29.)

Sound from left and right speakers is reversed.

Sound is heard from only one side.

• Are audio cables connected properly? (See page 12.)

There is a picture but no sound.

• Is the sound muted? (See page 18.)

• Make sure the volume is not set to minimum. (See page

18.)

• Are audio cables connected properly?

• When AUDIO OUTPUT is set to VARIABLE2 in the AUDIO

menu, the speaker is muted. Check the setting. (See page

27.)

Unstable video.

• The signal may be incompatible. (See pages 43 and 44.)

The video from the HDMI input terminal does not appear

properly.

• Is the HDMI cable HDMI standard compliant? The monitor

will not work with cables that are not standard compliant.

• Is the input signal compatible with this monitor? (See pages

43 and 44.)

The video from DisplayPort input terminal does not

appear correctly.

• Is the input signal compatible with this monitor? (See page

43.)

• Is the DisplayPort cable DisplayPort standard compliant?

The monitor will not work with cables that are not standard

compliant.

The video from D-sub input terminal does not appear

correctly.

• Is the input signal compatible with this monitor? (See page 43.)

Video color is strange.

• Is the PICTURE menu setting correct? You can execute

RESET to return to the factory default settings. (See page

26.)

Control buttons do not work.

There is no picture.

• Load noises from outside may be interfering with normal

operation. Turn off the main power and turn it on after

waiting at least 5 seconds, and then check the operation.

(See page 17.)

• Turn on the monitor first before turning on the computer or

playback device.

The input mode changes automatically.

• When the NO SIGNAL AUTO INPUT SEL. is ON and no

signal is present in a selected input mode, the monitor

automatically changes the selected mode to a mode where

a video signal is present.

The input mode may change in the following cases:

- When a computer is in standby mode.

- When video play is stopped with a playback device.

The touch panel does not respond.

• Is the USB cable connected properly?

• Is the monitor in pen-only mode? Touch action is disabled

in pen-only mode. (See page 19 and 21.)

• Is the monitor in finger-only mode? You cannot touch the

screen with the touch pen when in finger-only mode. (See

page 19 and 21.)

• If your finger is too dry, the screen may not respond.

• Do not touch the screen when the monitor power is turned

on, it will lead to a malfunction. When this occurs, turn the

monitor power off and then on.

• Use only the supplied USB cable. If the commercially

available USB cable is used, the touch panel may not

operate correctly.

If you want to position the monitor further away than the

USB cable will allow, extend the cable using a USB cable

with a repeater.

• When USB PORT SELECTION is OPTION, the touch panel

cannot be used with the computer that is connected to this

monitor.

When “AUTO DIMMING” is displayed.

• When the internal temperature of the monitor rises

excessively, the brightness of the backlight automatically

decreases in order to prevent a further temperature rise. If

you attempt to adjust the brightness while the monitor is in

this state, “AUTO DIMMING” is displayed and you cannot

change the brightness.

• Remove the cause of the excessive temperature rise.

The monitor makes a cracking sound.

• You may occasionally hear a cracking sound from the

monitor. This happens when the cabinet slightly expands

and contracts according to change in temperature. This

does not affect the monitor’s performance.

Содержание PN-40TC1



















































Результаты поиска

Содержание PN-40TC1

Отзывы:

Похожие инструкции для PN-40TC1

Бренды по названию

Популярные бренды

Sharp PN-40TC1, Руководство по эксплуатации

Результаты поиска

Содержание PN-40TC1

Отзывы:

Похожие инструкции для PN-40TC1

Бренды по названию

Популярные бренды