Sharp PN-40TC1 Скачать руководство пользователя страница 13

Страница: 13 / 50

Connecting the Power Cord

Caution

• Use only the power cord supplied with the monitor.

1. Turn off the main power switch.

2. Plug the power cord (supplied) into the AC input terminal.

3. Plug the power cord (supplied) into the AC power outlet.

Main power

switch

Power cord (Supplied)

AC input

terminal

For power

outlet

Connecting Peripheral Equipment

Caution

Precautions when a USB storage device (USB flash drive,

USB hard disk, etc.) is used

• When USB PORT SELECTION in the SETUP menu is

AUTO and the input mode is changed to OPTION, the USB

and touch panel connection changes to the expansion slot

device.

When the input mode is changed from OPTION, the USB

and touch panel connection changes to this monitor.

• Data may be corrupted if the connection is switched while a

USB storage device is being accessed.

When connecting a USB storage device, set USB PORT

SELECTION to EXTERNAL or OPTION depending on the

connected device to fix the connection.

Or, set to MANUAL, change the input mode, and then make

sure the USB storage device is not being accessed before

switching the connection manually.

9. USB port (for touch panel)

• To use the touch panel, connect to your computer with the

provided USB cable.

10. USB port

• Can be used as a USB hub (USB 2.0 compliant) of the

computer that is connected to the USB port (for touch

panel).

• When the monitor power is ON, USB power can be

supplied.

When RESUME BY TOUCH is set to ON, USB power can

also be supplied in the input signal waiting mode.

• When a function is added using the expansion slot and

the input mode is set to OPTION, a USB device can

be used with the device in the expansion slot. (When

USB PORT SELECTION is set to a setting other than

EXTERNAL.)

When this is done, the USB device cannot be used with

the computer that is connected to the USB port (for touch

panel).

* Terminal for firmware updating

Normally not used.

Содержание PN-40TC1



















































Результаты поиска

Содержание PN-40TC1

Отзывы:

Похожие инструкции для PN-40TC1

Бренды по названию

Популярные бренды

Sharp PN-40TC1, Руководство по эксплуатации

Результаты поиска

Содержание PN-40TC1

Отзывы:

Похожие инструкции для PN-40TC1

Бренды по названию

Популярные бренды